🔧 Ready to Upgrade Your Mixer? Here's How to Do It Right! 🚰

Hey DIY enthusiasts! If you’re thinking about changing your mixer, here’s a quick guide to help you do it smoothly:

1️⃣ **Turn Off the Water Supply:** This is a must! Locate the valves under your sink and twist them clockwise to shut off the water. 

2️⃣ **Remove the Old Mixer:** Use a wrench to loosen and remove the nuts securing the mixer. Keep a towel handy to catch any residual water.

3️⃣ **Prepare the New Mixer:** Ensure it comes with a gasket or seal to prevent leaks. Position the mixer through the sink holes and secure it from below with the provided nuts.

4️⃣ **Connect Water Supply Lines:** Attach the hot and cold water lines to the corresponding inlets on the mixer. Tighten with a wrench, but be careful not to over-tighten.

5️⃣ **Check for Leaks:** Turn the water supply back on and test the mixer. Look for any leaks and tighten as necessary.

Happy renovating! 🛠️💧